I read something about being able to bend PVC?? There was a thread here about cable wire for toys and it was mentioned that you can also shape PVC pipe by heating sand, putting it in a funnel thru the PVC pipe to bend it?
If anyone has experience with this, or can direct me to a thread that I can reference, that would be great!
I have a pipe bender. It is like a super charged hair blow dryer (It gets SUPER hot and not as much air flow). I fill the pipe with sand (tape the ends) and then use the "blow dryer" to heat the pipe. It takes a little practice because the pipe can get scorched pretty easy. Then when it is soft, I bend it to the shape I want and run cold water over it to cool/harden it. For more complex shapes, I bend it and some how secure it in the shape I want and just let it cool on it's own.
The reason for the sand is so the pipe keeps it's shape and doesn't "fold" while you are bending it.
620-704-9109 Judge not until you have walked in their shoes and lived their lives. What you see online is only part of the story.
I could have missed the pain But I'd of had to miss the dance
The soul would have no rainbow if the eyes had no tears.
Here is a general idea. If you want to make a twist you can bend it and hold it while the sand cools. Also I would cap both ends to prevent a accidental mess.
Last edited by xSwtxSugaX; 11/14/1212:11 AM.
"The purity of a person's heart can be quickly measured by how they regard animals"
Stacie that was a great video. Thank you for posting it. I have tried making the pvc pipe trees and I didn't put the sand in the pipe and my bends ended up very messy looking. I'll have to try something just to see how it works.
Connie: soon to be wife to Harold, mom to 3 children, 2 precious kitties, and my treasured gliders.
Just so everyone wouldnt hve to do it twice like he did, I would set the oven at 550 the first time, and fill the pipe all the way up with sand and cap both ends. You can bend it the shape you like and hold it while it cools or create a mold to hold it in place with a wooden board and some nails.
I havnt had a chance to try it yet but have been wanting to! Glad the video helped.
"The purity of a person's heart can be quickly measured by how they regard animals"
550? Whoa... I set my oven on the LOWEST setting... 250 I think it is. 8 minutes usually does the trick, although I don't use sand... I have another method for that part. You want to be careful because to high a setting or to long in there and you can probabley burn the pipe... it also releases chemicals in the pvc.
Anytime you heat the PVC you can release chemicals in the air. I personally don't recommend doing this in the house at all. When we make our Sugar Maples, we do it in the workshop that is well ventilated.
Shelly
Don't sacrifice quality information for convenient information.
ok, good to know about the temp! Like I said.. Never done it before. I watched another video as well, but cant embedd it, They had theres set pretty high as well.
"The purity of a person's heart can be quickly measured by how they regard animals"